FAQs & Troubleshooting
Looking for help with your Conway Corporation services? Find answers to frequently asked questions and more below. If you need additional assistance, please contact one of our customer care specialists at 501-450-6000. We have technical support available 7 a.m. to 9 p.m. Monday through Friday and 9 a.m. to 9 p.m. Saturday and Sunday.
We are proud to serve the Conway community 24 hours a day, 365 days a year and are committed to providing you high-quality products at reasonable rates. If you have questions, comments or suggestions regarding Conway Corporation, we would love to hear from you.
When MISO orders a public appeal for conservation, we immediately ask customers to minimize energy usage as much as possible until the system strain has passed. You can help by:
- Increasing or decreasing your thermostat, depending on the weather. Even a few degrees can make a big difference.
- Unplugging electronic devices and turning off lights that are not in use.
- Holding off on doing chores. Delay laundry, washing dishes and other non-essential uses of electricity.
Conway Corp’s load curtailment plan was developed to comply with emergency constraints on generation resources on the transmission grid. Many of our large commercial accounts voluntarily curtail load during these events, but sometimes we are still required to shed additional load.
Voluntary actions by participating business and residential customers serve as a last line of defense before having to interrupt our service. Reduction in curtailable load or calls for conservation could avoid the need to shed load to a broader group of customers. Even if conditions continue to escalate after this step, it still helps reduce the overall quantity of megawatts required to be shed. This means fewer customers are potentially impacted for a shorter amount of time.
Street lights are a very small percentage of our electric demand and do not make up enough of the demand to conserve energy. We cannot remotely turn off street lights so it takes more time and effort than the amount of energy it could potentially save.
MISO is a not-for-profit, member-based organization that ensures reliable, cost-effective delivery of electricity across all or parts of 15 U.S. states and one Canadian province. It is one of the nation’s largest regional transmission organizations. In cooperation with stakeholders, MISO manages approximately 65,000 miles of high-voltage transmission and 200,000 megawatts of power-generating resources across its footprint.
Conway Corp entered the Midcontinent Independent System Operator market in December 2013 and is part of their southern region. Being a part of MISO allows Conway Corp to better coordinate and optimize generation and transmission for the benefit of Conway Corp customers.
Depending on the type of constraint and given impacts to the grid, either Conway Corp or MISO will initiate steps to shed load. For example, if MISO initiates, then Conway Corp must immediately begin shedding load under emergency conditions. This is a requirement to avoid catastrophic grid failures which could result in prolonged power outages.
This could happen at any time of the day or night, and we are given little warning time. It is only done in emergency situations as a last resort, but we must comply to prevent longer, widespread uncontrolled outages.
Not necessarily. The number of customers affected will depend on the severity of the situation. The more load shed required, the more customers will be impacted. Shedding load is always a last resort, but if needed, it could affect different customers depending on the cause or situation.
Conway Corp’s grid is managed by our reliability coordinator Midcontinent Independent System Operator. A system-wide load shed is initiated only by MISO as a result of an imbalance of supply and demand of electricity and required to protect the bulk electric system – which is interconnected across the country.
Such a scenario could occur due to extreme weather like a hurricane, winter storm or unusually high or low temperatures. Conway Corp has only been required to shed load across our service area once since we entered the MISO market in late 2013, and this load shed occurred during the extreme cold weather brought by Winter Storm Uri in February 2021. Uri impacted much of the country, resulting in record-breaking low temperatures. We have asked customers to voluntarily curtail their electric usage to prevent load shedding, and in most cases voluntary reductions work.
Shedding load is required when the demand for electricity approaches supply, creating the potential for a dangerous imbalance. It’s a way to help reduce power demand by turning power off to some customers for a shorter time to help prevent longer, larger outages. The immediate reduction of power demand is critical to prevent a catastrophic, extended failure of the larger electrical grid.
Power generation and load must always match up or remain balanced – otherwise the grid’s integrity will be compromised. There are strict standards that utilities must follow to maintain this balance. Shedding load is always a last resort to prevent more extensive and prolonged power outages that could severely affect the reliability of the power grid.
Call customer service at 501-450-6000. If you call outside of normal business hours – Monday through Friday from 8 a.m. to 5 p.m. – follow the phone prompts to report. If you have a safety emergency, you can choose to speak to a live representative 24 hours a day.
Please do not report outages or safety emergencies via email, Facebook or Twitter. While we ask you do not report outages via social media, you can like us on Facebook or follow us on Twitter for updated outage information.
Please call us at least one business day in advance to schedule a temporary disconnect. Temporary shut-offs occur Monday through Friday from 8 a.m. to 5 p.m. If it is an emergency situation, we do have someone available 24 hours a day. Call 501-450-6000 to schedule your temporary disconnect.
As a free service to our customers, Conway Corp contracts tree trimming companies to keep trees from growing into the power line right-of-way. We will also remove any limbs or branches that are touching or have fallen on our lines. Please contact 501-450-6000 to request tree trimming.